Epoxy product data compared
Every value in this table is copied from the manufacturer’s technical data sheet, safety data sheet or product page. “Not published” means we looked and the manufacturer does not state it. Open a product for the exact wording, test conditions and source links.
| EcoPoxy FlowCast | Deep pour | 2:1 | 2.3:1 | 38mm (1.5") | 20-44 hours (tacky to touch period) | 8-12 hours | 7-14 days | 20-25°C (68-77°F) |
|---|---|---|---|---|---|---|---|---|
| EcoPoxy FlowCast SPR | Casting | 2:1 (A:B) by volume | 2.5:1 (A:B) by mass | 25mm (1") | at set to touch: 24 hours (25mm casting); 32 hours (13mm casting); then abrade | 4-5 hours (25mm casting); 6-7 hours (13mm casting) | 3 days (25mm casting); 7 days (13mm casting) | 20-25°C (68-77°F) |
| EcoPoxy SnowWhite | Deep pour | 2:1 | 3.1:1 | 38mm (1.5”) | 15-22 hours (tacky to touch period) | 7 hours | 3 days | 20-25°C (68-77°F) |
| EcoPoxy UVPoxy | Tabletop / coating | 1:1 | 1.2:1 | Up to 3.2mm (1/8”) | 4-10 hours (tacky to touch period) | 30-40 minutes | 48 hours | 20-25°C (68-77°F) |
| MAS Deep Pour X Casting Epoxy Resin | Deep pour | 2A : 1B by volume | 100A : 44B by weight | 3" thick in a single pour | Typical time between pours 24-48hrs | up to 1 hour to mix and pour 5 gallons or less at 60-80°F | 5-7 days | 60°F-80°F |
| MAS Table Top Pro Epoxy Resin | Tabletop / coating | 1A : 1B by volume | 100A : 85B by weight | flood coats up to 1/8" thick | can usually be recoated in 4-8 hours without any additional prep work or sanding | 10-15 minutes (rough average for a full kit at room temp) | 5-7 days before putting into service | 70-80°F |
| Promise Epoxy Deep Pour Epoxy Resin | Deep pour | 2 Part Resin : 1 Part Hardener | not published | up to two-inch thick layers | roughly 48 hours (first pour firm but tacky) | 50-70 minutes | 7 days | 65-75°F |
| Smooth-On EpoxAcast™ 690 | Casting | not published | 100A : 30B by weight | 3/4" (1.9 cm) fan-cooled; 3/8 in. (0.95 cm) standard casting | allow previous layer to fully cure before pouring subsequent layers | 5 Hours | 24 Hours (standard casting method); 36 Hours (fan-cooled casting method) | 70°F/21°C |
| Smooth-On EpoxAcast™ 692 Deep Pour | Deep pour | not published | 100A : 40B by weight | 2" (5.08 cm) fan-cooled; 1 1/2" (3.81 cm) standard casting | allow previous layer to fully cure before pouring subsequent layers | 12 Hours | 72 Hours (standard casting method); 7 Days (fan-cooled casting method) | 70°F/21°C |
| Stone Coat Countertops Art Coat Epoxy | Tabletop / coating | 1 Resin : 1 Hardener | 100 R : 90 H | .25 inch | 14-24 hours | 55-75 minutes | 7 days | 65-75°F |
| Stone Coat Countertops Countertop Epoxy | Tabletop / coating | 1 Resin : 1 Hardener | 100 R : 90 H | .25 inch | 14-24 hours | 45-55 minutes | 7 days | 65-75°F |
| Superclear Liquid Glass Deep Pour Epoxy | Deep pour | 2:1 by Volume | 100 A to 44 B by Weight | up to 4” thick per pour | when the pour is tacky and nearly hard | 8 to 12 hours | 36-48 Hours | 70°F to 84°F |
| Superclear Table Top Epoxy | Tabletop / coating | 1:1 by Volume | 100 A to 83 B by Weight | up to 1/4” thick per pour | 2-4 hours | begins to thicken within 30 minutes | 24 Hours Depending On Thickness & Ambient Temperature | 70°F and 84°F |
| TotalBoat Fathom Deep Pour Epoxy | Deep pour | 2:1 (Resin:Hardener) by volume | 100:44 (Resin:Hardener) by weight | up to 3" per layer (casting in smaller mold, up to 1 mixed gallon); 2" for river tables and slab pours | minimum of 36 hours (conservative); at least 24 hours if the previous layer is below 85°F and firm | 4-6 hours | 5-7 days | 60-80°F |
| TotalBoat TableTop Epoxy | Tabletop / coating | 1A:1B by volume | 1.2A:1B by weight | Up to 1/4" per coat (coatings); up to 1" (castings up to 6 fl. oz.) | 3 hours minimum at 70°F — no sanding required | 40 minutes at 70°F | 5-7 days | 65-80°F |
15 products. Source documents accessed 2026-09-30. Sort by any column; products that do not publish a value sort last.